Untitled Document Untitled Document
Untitled Document Untitled Document
Untitled Document
Untitled Document

 
Untitled Document Untitled Document
  fork rebuilds Lnav
   4CS fork kit tools  
  • Click on picture to enlarge.
 
   

  4CS fork kit tools
 
1)

Picture of all tools needed
  ctg tube holder           $60.00
  8mm clamp block         $30.00
  24.6mm clamp block    $30.00
  push tool                    $5.00

  set = $125

    2)



A push tool is needed to push the cartridge from the main chrome tube.  The 4CS tool kit includes a 1 inch diameter x 12 inch long piece of plastic.  


    3)



The 24.6 mm clamp block is needed to hold the ctg tube while removing the seal assy.  


    4)



The 8 mm clamp block holds the cartridge assembly so you can work on the mv pist, valving etc.  

    5)



The base bolt can spin and not tighten with wrench.  

    6)



We recommend using a cartridge tube holder so you can tighten the base bolt by hand.

Use caution if using impact wrench. 


    7)



The cartridge tube holder prevents the cartridge from spinning as the base bolt is tightened.  

 
 
 
Untitled Document Untitled Document
 fork rebuilds rnav
4CS fork kit installation
4CS kit install instructions
4CS kit tools
4CS fork - fill w/oil, set level
4CS fork - fill ctg tube
4CS fork - setting oil level
 
4CS fork - spring preload
4CS fork - spring preload
 
4CS fork kit explaination
4CS kit explaination