pagename = .php Untitled Document
  import shock dyno force numbers for c-zeta using levratio c-zeta is a curve based on 3075    Do a linear scale to start and make some comparisons and adjust. vdb / excel / zeta_backwards_shc.xlsx
  • This going up and down in 1.075% increments may not going to work for ls comp force for lower velocities at 1-2ips. 
    • We need a certain amount of ls comp at 1-2ips.  Even for soft-2 we will probably need about the same amount as 'aver'.
    • I can see increasing ls comp for stiff, stiff+1 etc.  But we don't want it to increase too much.
    • And from a valving standpoint, there is only so much low speed we can get out of a shock. 
    • For now, it is a good tool to compare 'aver' comp force between bikes with different lev ratio.  We can shoot for our ideal c-zeta and see where it leads.
    • This is the originial, we saved in case we wanted to look at something
    percent increment   1.075 ---------->
soft-2
[x .805]		 soft-1
[x .865]		 soft
[x .930]		 aver
[x 1.000]		 stiff
[x 1.075]		 stiff+1
[x 1.156]		 stiff+2
[x 1.242]		 stiff+3
[x 1.335]		 stiff+4
[x 1.436]		 stiff+5
[x 1.543]		 stiff+6
[x 1.659]		 stiff+7
[x 1.783]
comp zeta .88 comp zeta .94 comp zeta 1.01 comp zeta 1.09 comp zeta 1.17 comp zeta 1.26 comp zeta 1.35 comp zeta 1.46 comp zeta 1.57 comp zeta 1.68 comp zeta 1.81 comp zeta 1.94
co wogas
co wogas
co wogas
co wogas
co wogas
co wogas
co wogas
co wogas
co wogas
co wogas
co wogas
co wogas